Glue Board Fly Traps Special Protection
Special protection UV insect traps are designed for industrial environments where a standard device may not be enough: damp areas, dusty environments, frequent wash-down, demanding food industry sites and classified areas with special risk.
In this category you will find UV insect traps with IP65 protection and specific ATEX equipment for controlling flies, mosquitoes, moths and other flying insects in professional facilities. They are intended for spaces where moisture, dust, cleaning, safety or area classification determine the choice of device.
It is important to separate concepts clearly: an IP65 UV insect trap is protected against dust and water, but it is not automatically ATEX. An ATEX insect light trap should only be selected when the site classification requires it.
Which special protection UV insect trap to choose
| Situation | Recommended solution | Comment |
|---|---|---|
| Damp area, frequent wash-down or greater exposure to water | ProFly IP65 - Special Protection Fly Killer | Recommended when an industrial glue board device needs protection against dust and water. |
| Dusty environment or demanding industrial conditions | ProFly IP65 | Useful where a standard industrial UV insect trap may not be enough. |
| Classified area with potentially explosive atmosphere | ATEX Insect Light Trap - Vortex 18 LED | Specific equipment for installations that require an ATEX insect light trap according to the area classification. |
| Standard food industry area without moisture or special requirements | Industrial UV insect traps | A standard industrial glue board device may be sufficient if there is no wash-down, high moisture or special requirement. |
| Visible public area, restaurant, bar or shop | Decorative UV insect traps | Use decorative models when appearance is the priority. |
| Entrance, exit or passageway without food handling | Electric fly killers and insect zappers | They may help in passage points, but they do not replace IP65 or ATEX equipment when technical requirements exist. |
| Installed device that needs maintenance | Spare parts, replacement glue boards and UV tubes | Glue boards, UV tubes and spare parts must be checked and replaced regularly. |
When to choose an IP65 UV insect trap
An IP65 UV insect trap is recommended when the device will be installed in an area with dust, moisture, splashes, frequent cleaning or conditions that are more demanding than a standard indoor space.
ProFly IP65 is designed for this type of situation. It should not be confused with ATEX equipment: IP protection refers to dust and water resistance, not to explosive atmosphere certification.
ProFly IP65: protected UV insect trap for demanding areas
ProFly IP65 - Special Protection Fly Killer is a protected industrial glue board system for controlling flying insects where more resistance to dust and water is needed.
It can suit professional facilities with moisture, frequent cleaning or harsher conditions than a conventional room, including food industry areas that require higher protection than a standard industrial unit.
When to choose an ATEX insect light trap
An ATEX insect light trap should only be chosen when the installation is in a classified area with potentially explosive atmosphere, or when the site's risk assessment requires ATEX equipment.
This may apply to industries with flammable dusts, vapours, gases, volatile products or processes with explosion risk. The device must be selected according to the real classification of the area.
ATEX Vortex 18 LED
ATEX Insect Light Trap - Vortex 18 LED is specific equipment for installations that require an ATEX insect light trap. It is not a conventional industrial mosquito lamp: it is a technical solution for classified areas.
Difference between IP65, IP66 and ATEX
| Concept | What it indicates | Practical meaning |
|---|---|---|
| IP65 | Protection against dust and water | The device has protection against dust ingress and water jets according to its IP rating. |
| IP66 | Higher protection against dust and water | It indicates higher water protection than IP65 according to the corresponding rating. |
| ATEX | Equipment for potentially explosive atmospheres | Applies to devices intended for classified areas with explosion risk due to gases, vapours or flammable dusts. |
An IP65 or IP66 device is not automatically ATEX. If the installation requires ATEX, choose equipment specifically designed and certified for that type of area.
Food industry: standard industrial or special protection?
In many food industry, bakery, warehouse or production areas, an industrial UV insect trap with glue board may be enough. However, when there is high moisture, frequent cleaning, dust, splashes or special protection requirements, a special protection model such as ProFly IP65 should be considered.
If the area is also classified as a potentially explosive atmosphere, ATEX-compatible equipment must be studied. In that case, a standard IP65 device is not sufficient by itself.
Glue board capture in special industrial environments
Special protection UV insect traps use UV light and a glue board. This system captures flying insects without electric discharge and without scattering remains, making it useful for hygienic, inspectable control in professional environments.
What affects the price of an IP65 or ATEX insect trap?
- IP rating: IP65 or IP66 construction requires more protected design.
- ATEX certification: ATEX devices have specific requirements for classified areas.
- Materials: industrial environments often require more resistant construction.
- Coverage: the area to protect influences the required model.
- Installation type: wall-mounted, suspended or adapted to the work area.
- Use environment: moisture, dust, wash-down, vapours or special risk condition the choice.
- Spare parts: glue boards, UV tubes or specific components affect maintenance.
Maintenance and spare parts
Maintenance is essential. Glue boards must be replaced when they are full, dirty, dusty or have lost adhesion. UV tubes or light sources must also be checked according to the model and use.
In spare parts, replacement glue boards and UV tubes you can find compatible parts. For IP65 or ATEX devices, correct compatibility and maintenance are especially important.
Where to place an IP65 or ATEX insect trap
- Place it on insect routes or entry points, without interfering with sensitive processes.
- Do not install it directly above food, production lines or critical surfaces.
- Consider doors, loading bays, damp areas, waste and insect entry points.
- Keep the device accessible for maintenance and glue board replacement.
- In ATEX areas, always verify that both equipment and installation match the area classification.
- Avoid direct competition with strong sunlight or lighting that reduces UV attraction.
What to avoid
- Do not confuse IP65 with ATEX.
- Do not use a standard industrial device in an area that needs special protection.
- Do not choose ATEX equipment without knowing the area classification.
- Do not install the device without reviewing insect routes and technical conditions.
- Do not forget maintenance and compatible spare parts.
- Do not choose only by price when technical suitability is the priority.
Frequently asked questions about special protection UV insect traps
What is a special protection UV insect trap?
It is a UV insect trap designed for environments where a standard device may not be enough, such as damp, dusty, wash-down, IP65, IP66 or ATEX areas.
When do I need an IP65 UV insect trap?
Consider IP65 when the device will be installed in an area with moisture, dust, splashes, frequent cleaning or more demanding industrial conditions.
What is the difference between IP65 and ATEX?
IP65 indicates protection against dust and water. ATEX refers to equipment suitable for potentially explosive atmospheres. IP65 is not automatically ATEX.
When should I choose an ATEX insect light trap?
Choose ATEX when the installation is in a classified area with explosion risk and the device must meet specific requirements for that environment.
Can an IP65 insect trap be used in ATEX areas?
Not necessarily. IP65 protection is not equivalent to ATEX certification. A classified ATEX area requires suitable ATEX equipment.
Which device is suitable for damp or wash-down areas?
For damp areas, splashes or frequent cleaning, an IP65-protected UV insect trap can be considered, provided there is no ATEX requirement.
What should be used for flour mills or flammable dust?
If there is risk of explosive atmosphere due to flammable dust, an ATEX insect light trap compatible with the area classification must be considered.
Why use glue boards in special industrial environments?
Glue boards retain captured insects, avoid scattering remains and allow captures to be inspected during maintenance.
What maintenance is needed?
Regular inspection, glue board replacement and checking UV tubes or light sources according to the model and operating time.
Where should IP65 or ATEX devices be placed?
On insect routes, away from food or critical processes. In ATEX areas, installation must also respect the area classification and technical requirements.
IP65 and ATEX UV insect traps at BirdGard Iberia
At BirdGard Iberia you will find special protection UV insect traps for demanding industrial environments: moisture, dust, frequent wash-down, food industry with specific requirements and ATEX classified areas. Choose ProFly IP65 for demanding environments and Vortex 18 LED ATEX for installations that require ATEX equipment.
If you are unsure which solution fits your facility, also review industrial UV insect traps, spare parts and fly killers and UV insect traps, or contact us.