Support for mounting StopGull Air above an open bimini
The Open Bimini Support lets you fit your StopGull Air or StopGull Air XL above the bimini when it is open. It attaches to the tubular frame and positions the deterrent above the fabric, close to an area where birds may perch.
It fits tubes from 22 to 28 mm in diameter. The StopGull Air or StopGull Air XL bird deterrent is sold separately.
Installation requires a hole in the bimini fabric
The clamp attaches to the bimini tube beneath the fabric. To fit the deterrent base above it, you need to make a hole in the fabric for the support’s threaded rod to pass through.
Please take this requirement into account before buying. We recommend checking the support’s position and the movement of the bimini as it folds before making the hole, and following the assembly sequence shown in the product instructions.
Check the diameter and available space
Before buying, measure the outside diameter of the tube you want to use. It must be within the 22 to 28 mm range.
As well as checking the tube diameter, make sure the chosen position allows the deterrent to sit above the fabric and its arms to rotate without touching the bimini, ropes or other fittings. If you are using StopGull Air XL, pay particular attention to the clearance needed for rotation.
Fitting to the bimini frame
- Choose a point on the tubular frame within the stated diameter range and check the available space for the deterrent.
- Hold the clamp against the tube beneath the fabric to determine where the threaded rod needs to pass through.
- Make the necessary hole in the fabric for the threaded rod.
- Assemble the fastening components and upper base in the order shown in the manual.
- Check that the support is firmly secured before fitting the deterrent.
- Fit your StopGull Air or StopGull Air XL and check that its arms rotate freely.
We recommend regularly checking the attachment, the condition of the fabric around the mounting point and the deterrent’s turning clearance.
Do you need to remove the support to fold the bimini?
The design allows you to fold the bimini with the support fitted. Before doing so, check that the support will not catch on the frame or fabric as you fold it.
This applies to the support itself. Before folding the bimini, we recommend removing the deterrent if it could obstruct the frame’s movement or come into contact with other fittings.
The right support for each bimini position
This model is designed to mount the deterrent above an open bimini using its tubular frame. To mount it on a folded bimini or boom, we recommend choosing the support designed for those applications.
Positioning the deterrent
StopGull Air and StopGull Air XL work through wind-driven movement. We recommend choosing a spot exposed to the wind with enough clearance for rotation.
Protection is localised. If birds use several parts of the boat, consider the number and positioning of deterrents according to the spots you want to protect.
Key specifications
- Application: mounting above an open bimini.
- Compatibility: StopGull Air and StopGull Air XL.
- Attachment: tubular frame from 22 to 28 mm in diameter.
- Installation: requires a hole in the fabric for the threaded rod.
- Support dimensions: 6 x 6 x 4 cm, height x length x width.
- Material: AISI 316 stainless steel.
- Folding the bimini: the support can stay fitted, provided it does not obstruct folding.
- Bird deterrent: not included; sold separately.